Nearwiki: Created page with "===Troubleshooting your NearBus Connection===
If your Arduino remains DOWN, make the following verifications: '''ETHERNET CHECK LIST''' '''1- Verify that the gre..."

2018-03-29T20:46:32Z

Created page with "===Troubleshooting your NearBus Connection=== <br /> If your Arduino remains DOWN, make the following verifications: '''ETHERNET CHECK LIST''' '''1- Verify that the gre..."

New page

===Troubleshooting your NearBus Connection===
<br />

If your Arduino remains DOWN, make the following verifications:

'''ETHERNET CHECK LIST'''

'''1- Verify that the green light in the Arduino's Ethernet connector is flashing.'''

'''2- Verify that your internet connection is Up (if you can surf the internet).'''

'''3- Verify that your Arduino "user" and "password" are configured Ok (the 8 character password, the Device_ID and the Arduino's MAC).'''

'''4- Verify that your Arduino's Ethernet MAC address is configured Ok (you can find it a label on the back side of your arduino Ethernet board).'''

'''5- Reset the Arduino, to ensure that it is properly initialized.'''

'''WiFi CHECK LIST'''

'''1- Verify that the green light (Link) in the Arduino's WiFi board is ON.'''

'''2- Verify that your internet connection is Up (if you can surf the internet).'''

'''3- Verify that your Arduino "user" and "password" are configured Ok (the 8 character password and the Device_ID).'''

'''4- Verify that your WiFi SSID is configured OK, and the "wifimode" parameter matches with your WiFi router configuration (Open = 0 | WAP2 = 1 | WEP = 2). If you find issues try to configure your wireless LAN in open mode (to test the Arduino connection).'''

'''5- Remember checking if your WiFi router has configured the MAC Filtering Feature (in this case you should enable the Arduino's WiFi MAC on it !!).'''

'''6- Reset the Arduino, to ensure that it is properly initialized.'''

'''NETWORK TOOL:''' With Advanced IP Scanner you be able to scan all your IP addresses including Wi-Fi network. '''Download App:''' [http://www.advanced-ip-scanner.com]

'''IMPORTANT: The NearBus screens do not refresh in an automatic way, so you should reload it in order to get the device status.'''

'''REMEMBER:''' If you are experimenting random errors with your code (usually on memory exhaustion conditions), verify that the
#define parameters DEBUG_DATA, DEBUG_BETA and DEBUG_ERROR (in file NearBusxxx_xxx.h) are all set to 0 (in order to deactivate the
output debug messages).

#define DEBUG_DATA 0 // Set to 1 by default
#define DEBUG_BETA 0
#define DEBUG_ERROR 0

<br />
<br />
----

Troubleshooting - Revision history

Nearwiki: Created page with "===Troubleshooting your NearBus Connection=== If your Arduino remains DOWN, make the following verifications: '''ETHERNET CHECK LIST''' '''1- Verify that the gre..."

Nearwiki: Created page with "===Troubleshooting your NearBus Connection===
If your Arduino remains DOWN, make the following verifications: '''ETHERNET CHECK LIST''' '''1- Verify that the gre..."